Wafer Connection Vortex Flow Meter
Wafer Connection Vortex Flow Meter
BUENO Wafer Connection Vortex Flow Meter is a flow meter with wafer connection for a special requirement of plug-and-play installation. It is a flow sensor operable to sense pressure variations due to vortex-shedding of a fluid in a passage and to convert the pressure variations to a flow sensor signal, in the form of an electrical signal; and a signal processor operable to receive the flow sensor signal and to generate an output signal corresponding to the pressure variations due to vortex-shedding of the fluid in the passage.
The standard loop powered version of the vortex flow meter is equipped with the internal temperature compensation required for direct mass flow measurement. Each Vortex Steam Flow Meter is provided with a 4-20mA analog output for flow rate, a pulse output for totalization and a built-in user interface and display. The standard loop powered meter also includes HART. Optional versions are available with internal pressure compensation, multiple analog outputs an MODBUS serial communications.
- Rated Pressure 1.6Mpa, 2.5Mpa, 4.0Mpa (Customize)
- Signal Output pulse, 4-20mA
- Communication R485, HART
- Accuracy Liquid ±1%; Gas Steam ±1.5%, ±1%
- Explosion Proof Grade ExiaII CT2-T5 ExdIICT2-T5
- Degree of Protection IP65 or IP68
